Fast kart Parts

  • 9730 Reseda Blvd Northridge,(CA), 91324
  • (818) 700-1514

Free Shipping On Orders Above $150

Fast Kart Parts Logo
Contact Us
Birel ART Rear Axle 30mm x 960mm
Birel ART Rear Axle 30mm x 960mm - Yellow
Spec sheet - Birel ART Rear Axle 30mm x 960mm

Birel ART Rear Axle 30mm x 960mm (Yellow/Medium)

$276.00

Rear axle manufactured to Birel ART specifications with a 30×5×960 size and Yellow/Medium hardness rating, intended for use on compatible Birel ART chassis setups.

1 in stock

SKU: BRL-AX-30X960-YLW Category:

Description

This Birel ART rear axle is built to the 30 mm diameter, 5 mm wall thickness, and 960 mm length specification used on select Birel ART chassis. Axle choice plays a key role in rear grip, kart balance, and overall handling, making correct sizing and hardness selection important for consistent performance.

The Yellow axle is typically chosen when a balanced level of stiffness is required without moving to the extremes of very soft or very hard options. Rather than dramatically changing kart behavior, it is commonly used to fine-tune rear grip and response based on track conditions and driver preference.

Axle fitment is strictly dimension-based. Before ordering, confirm that the diameter, wall thickness, and length match your existing axle to ensure proper installation and alignment.

Specification Details
Product Type Rear Axle
Diameter 30 mm
Wall Thickness 5 mm
Length 960 mm
Hardness / Color Yellow
Brand Birel ART
  • 30 mm diameter axle designed to fit compatible Birel ART rear bearing carriers
  • 5 mm wall thickness selected to provide a controlled balance between flex and stability
  • 960 mm overall length intended for specific Birel ART chassis configurations
  • Yellow hardness rating commonly used to fine-tune rear grip without extreme setup changes
  • Direct replacement axle for applications requiring this exact size and specification

This rear axle is intended for Birel ART chassis that use a 30×5×960 axle specification. Fitment depends on axle diameter, wall thickness, length, and bearing carrier setup rather than chassis name alone. Use on other brands or chassis configurations is not guaranteed.

Always measure your current axle before purchasing to confirm compatibility.

Used as the rear axle on compatible Birel ART kart chassis. Axle selection is typically adjusted based on track grip, temperature, and handling balance. Installation should be performed by someone familiar with kart chassis setup to ensure correct alignment and bearing fit.

Frequently Asked Questions

The Yellow rating identifies the axle’s stiffness category within the Birel ART axle range. It is commonly used as a balanced option to adjust rear grip and handling feel without moving to very soft or very stiff axle characteristics.

No. Birel ART chassis use different axle lengths and specifications depending on model and class. Always confirm that your existing axle is 30 mm in diameter, 5 mm wall thickness, and 960 mm in length before ordering.

Not guaranteed. While some karts may use a 30 mm axle, bearing spacing, carrier design, and required axle length can differ. Fitment on non-Birel chassis should only be considered if all dimensions match exactly.

No. This rear axle is supplied as the axle only. Axle keys, circlips, and other installation hardware are not included and must be purchased separately if required for your setup.

Rear axles are typically replaced due to bending, damage, or when changing setup preferences rather than regular wear. If the axle shows visible runout, impact damage, or inconsistent handling, replacement may be recommended.